In order to provide Microsand & Powder Activated Carbon (PAC) mixing installations that facilitate a homogeneous and 100% dustless operation, Sodimate designed and manufactured, in addition to our regular mixing tanks, its own PAC wetting cone with hydro ejector. This type of installation reduces the power consumption since the water in the system is used to supply the hydro ejector which transfers the product to the powder.
It is equipped with a conical hopper in which powder is injected, a wetting ring that allows continuous cleaning and a low part of a hydro ejector suitable for the transfer of powder flow.
The Sodimate ejector uses water or other liquids under pressure as the motive fluid, and operate on the Venturi principle to mix dry chemicals into slurries.
The site’s water system continuously feeds the system and creates a depression that allows the powdered reagent to be sucked and its mixture with the water of transport. The installation calculates the loss of load caused by the isometry of the discharge pipe. The transfer can take several tens of meters and many elbows.
Depending on the client’s needs, the supply ranges from hopper alone with its hydroejector and wetting ring to complete integration on a pre-cabled skid with probes and valves allowing its full operation.
France
Tel: +33 1 30 10 61 70
USA
Tel: + (1) 773-665-8800
China
Tel: +86 21 6882 6398 – 8008
Mexico
Tel: +52 44 214 684 90
Spain
Tel: +34 93 452 51 35
Germany
Tel: + 49 6106 62 87 683
